The AR15 Bar Barrel Nut is used to connect BAR style handguards to standard threaded upper receivers. This product comes with 4 shims to properly time the gas tube with the upper receiver.

Compatible with mil-spec threaded upper receivers ONLY.

Includes:

• BAR Barrel Nut
• BAR Shim Pack (8 shims)

Features:

• Material: Machined from Billet 7075-T6 Aluminum
• Coating: Anodized Black
• Torque with standard AR15 armorer’s wrench (Does not work with Magpul® Armorer’s Wrench)
• Supports Mil-Spec AR-15 barrels with outer diameters up to .998”

View BAR Barrel nut instructions here.

Please Note: All Aero Precision Handguards use the BAR interface. If you intend to connect an Aero Precision Handguard to a standard threaded upper receiver, you will need a Bar Barrel Nut. If you have our M4E1 Enhanced Upper Receiver, you do not need a BAR Barrel Nut as the barrel nut and rail mounting platform are forged directly onto the upper receiver itself. *Recommended torque settings between 30 – 45 ft lbs. Torque over 45 ft lbs may result in damage to the barrel nut.

• Made in the USA
• Finish Anodized
• Platform AR15
• Weight (oz) 2.24 oz

The post AR15 BAR Barrel Nut appeared first on Tactical Cheetah.

This AR15 Barrel Nut fits standard AR15 Upper Receivers.

• Made in the USA
• Platform AR15
• Weight (oz) 1.2 oz
• Mil-spec phosphate coating

The post AR15 Barrel Nut appeared first on Tactical Cheetah.

Spare M4E1 Barrel Nut Wrench for use with the Aero Precision M4E1 Upper Receiver Barrel Nut.

• Made in the USA
• Platform AR15
• Weight (oz) 1.28 oz
• Works with a 1/2 inch drive torque wrench.

The post M4E1 Barrel Nut Wrench appeared first on Tactical Cheetah.

Spare screws for our M4E1/AR15 Enhanced Series Upper Receiver and Handguard.

Note: This product is already included with our AR15 Handguards. It is not necessary to be purchased separately. This individual product is available for customers who have lost or damaged their existing handguard screws.

Includes

• 8 – T15 Screws

UPDATE: As of 06/22/2017 we switched from T20 screws to new T15 screws.

• Made in the USA
• Platform AR15
• Screw Length: 8-32 x 3/8

The post AR15 Handguard Screw Pack – T15 (8 Screws) appeared first on Tactical Cheetah.

The ATLAS R-ONE is the newest addition to the Aero Precision Handguard lineup. Machined from 6061-T6 Aluminum, the R-ONE line of handguards are designed with size and weight in mind, providing the perfect handguard for your lightweight build. Our proprietary ATLAS attachment system is a durable and dependable mounting platform, maintaining a slim profile while still providing the strength and stability customers have grown to love from Aero Precision handguards.

Available in M-LOK® profiles with 4.8″, 7.3″, 9.3″, 10.3″, 12.7″ and 15″ options.

ATLAS

The new Aero Taper Lock Attachment System (ATLAS) is both functional and aesthetically pleasing. It features 2 mirrored tapered locking nuts that provide evenly distributed clamping pressure across a custom engineered barrel nut with use of a turnbuckle screw. A ratcheting detent further secures the design while providing positive registration during installation. By design, the even pressure of the ATLAS system avoids distortion of the handguard often seen with current applications during installation.

All hardware mounting parts are included with the purchase of an ATLAS Handguard.

Lightweight By Design

• M-LOK Handguard Weights: 4.8″ – 3.9 oz / 7.3″ – 5.22 oz / 9.3″ – 6.03 oz / 10.3″ – 6.7 oz / 12.7″ – 8 oz / 15″ – 9.07 oz
• Mounting Hardware Weight: 1.9 oz (same across all ATLAS Handguard options)

Features:

• Full top picatinny rail for optional attachments
• Quick disconnect sling socket at the 3, 6 and 9 o’clock positions
• Compatible with low profile gas blocks
• 1.3″ Inside diameter
• 1.5″ Outside diameter
• Compatible with mil-spec AR15 upper receivers and barrels
• NOT Compatible with M4E1 Enhanced Upper Receivers

ATLAS Handguards are designed to match seamlessly with our M4E1 Threaded Upper Receivers. Additionally, they are compatible with any Mil-Spec AR-15 upper receivers as well. However, they may not be compatible with billet upper receivers due to indexing tabs.

Please note: The ATLAS Handguards are NOT compatible with our M4E1 Enhanced Upper Receiver.

SPECS

• Shipping to FFL Dealer Required No
• Made in the USA
• Handguard Series ATLAS
• Attachment Type M-LOK
• Material Machined from 6061-T6 aluminum 4.8″, 7.3″, 9.3″, 10.3″, 12.7″, 15″
• Actual Handguard Lengths: Aero Precision rail lengths measure from end to end. This is the point of contact at the receiver to the end of the last picatinny slot at the muzzle.
• Weight (oz) 4.8″ – 3.9 oz / 7.3″ – 5.22 oz / 9.3″ – 6.03 oz / 10.3″ – 6.7 oz / 12.7″ – 8 oz / 15″ – 9.07 oz
• Other: Mounting Hardware Weight: 1.9 oz

The post AR15 ATLAS R-ONE M-LOK Handguard appeared first on Tactical Cheetah.

The ATLAS S-ONE is the newest addition to the Aero Precision Handguard lineup. Machined from 6061-T6 Aluminum, the S-ONE line of handguards are designed with size and weight in mind, providing the perfect handguard for your lightweight build. Our proprietary ATLAS attachment system is a durable and dependable mounting platform, maintaining a slim profile while still providing the strength and stability customers have grown to love from Aero Precision handguards.

Available in M-LOK® profiles with 7.3″, 9.3″, 10.3″, 12.7″ and 14.94″ options.

ATLAS

The new Aero Taper Lock Attachment System (ATLAS) is both functional and aesthetically pleasing. It features 2 mirrored tapered locking nuts that provide evenly distributed clamping pressure across a custom engineered barrel nut with use of a turnbuckle screw. A ratcheting detent further secures the design while providing positive registration during installation. By design, the even pressure of the ATLAS system avoids distortion of the handguard often seen with current applications during installation.

All hardware mounting parts are included with the purchase of an ATLAS Handguard.

Lightweight By Design

• M-LOK Handguard Weights: 7.3″ – 4.86 oz / 9.3″ – 5.47 oz / 10.3″ – 6.0 oz / 12.7″ – 7.00 oz / 15″ – 7.95 oz
• Mounting Hardware Weight: 1.9 oz (same across all S-ONE Handguard options)

Features:

• Front and rear picatinny rail
• Eliminated center of top rail for weight reduction
• Indexing grooves in 12:00 position for positive grip control
• Quick disconnect sling socket at the 3, 6 and 9 o’clock positions
• Compatible with low profile gas blocks
• 1.3″ Inside diameter
• 1.5″ Outside diameter
• Compatible with mil-spec AR15 upper receivers and barrels
• NOT Compatible with M4E1 Enhanced Upper Receivers

ATLAS Handguards are designed to match seamlessly with our M4E1 Threaded Upper Receivers. Additionally, they are compatible with any Mil-Spec AR-15 upper receivers as well. However, they may not be compatible with billet upper receivers due to indexing tabs.

Please note: The ATLAS Handguards are NOT compatible with our M4E1 Enhanced Upper Receiver.

SPECS

• Shipping to FFL Dealer Required No
• Made in the USA
• Handguard Series ATLAS
• Attachment Type M-LOK
• Material Machined from 6061-T6 aluminum
• Actual Handguard Lengths: Aero Precision rail lengths measure from end to end. This is the point of contact at the receiver to the end of the last picatinny slot at the muzzle.
• Weight (oz) 7.3″ – 4.86 oz / 9.3″ – 5.47 oz / 10.3″ – 6.0 oz / 12.7″ – 7.00 oz / 15″ – 7.95 oz
• Other: Mounting Hardware Weight: 1.9 oz

The post AR15 ATLAS S-ONE M-LOK Handguard appeared first on Tactical Cheetah.

Our Enhanced Quad Rail (EQ) Handguards provide a lightweight free float design for your custom AR15 build. The EQ system features x4 1913 picatinny rails for advanced modularity and customization. Machined to mil- spec dimensions and engineered to perfection, these handguards eliminate bulk while retaining strength and stability.

Features:

• 1pc free float design
• Built in anti-rotation tabs
• Scalloped rails
• Continuous top rail
• 1.72″ inside diameter (from barrel nut cut to forward end) fits most muzzle devices and 1.5″ suppressors
• 1.78″ inside barrel nut cut area diameter
• Compatible with low profile gas blocks
• Gen 2 Feature – Eliminated half of the 3, 6 and 9 o’clock picatinny rails, saving weight and providing a more ergonomic design in the rear gripping area
• Gen 2 Feature – Quick disconnect sling socket at the 3, 6 and 9 o’clock positions
• Gen 2 Feature – Additional milling along flats to aid with gripping and add visual appeal
• Gen 2 Feature – New profile for the continuous picatinny top rail

Are you attaching this handguard to a standard threaded upper receiver?
Make sure to select “Yes” under the Bar Barrel Nut option above (shims included). Our handguards use the BAR interface and do not work with a standard barrel nut. If you are using our M4E1 Enhanced Upper Receiver, no additional pieces are needed. Purchased with a handguard, the BAR Barrel Nut is $20 ($40 when sold separately).

*Please note – This handguard is specific to the AR15/M4E1 platform. It is not compatible with the M5 .308/M5E1 platform.

SPECS

• Shipping to FFL Dealer Required No
• Made in the USA
• Handguard Series M4E1
• Attachment Type Quad Rail
• Material Machined from 6061-T6 aluminum 7″ – 7.25″, 9″ – 9.22″, 12″ – 12.63″, 15″ – 14.94″
• Actual Handguard Lengths: Aero Precision rail lengths measure from end to end. This is the point of contact at the receiver to the end of the last picatinny slot at the muzzle.
• Weight (oz) 7″ – 7.2oz, 9″ – 8.8oz, 12″ – 12oz, 15″ – 13.6oz
• Other: Handguard Screw Torque – 25 in-lbs

The post AR15 Enhanced Quad Rail Handguards, Gen 2 appeared first on Tactical Cheetah.

The Magpul MOE M-LOK Hand Guard (Magpul Original Equipment) for AR15/M4 firearms with carbine-length gas systems combines the light weight of a standard hand guard with modular flexibility.

Designed with versatility in mind, M-LOK slots at the two, six, and ten o’clock positions allow the attachment of optional 1913 Picatinny rail sections and other M-LOK accessories for the direct mounting of tactical lights, slings, grips, etc. Reinforced, heat-resistant polymer construction provides operational durability without the weight and expense of an aluminum rail hand guard. Front extensions and lower lip provides additional operator protection from hot front sight assembly.

Features:

• Replaces standard M4 Carbine, Mid-Length or Rifle-type plastic hand guards
• Compatible with most piston-driven as well as ‘direct impingement’ gas systems
• Easy to install utilizing existing delta ring and round or triangular front hand guard retaining cap
• M-LOK slots at the two, six, and ten o’clock positions for mounting MIL-STD-1913 Picatinny rails or other direct-attach M-LOK accessories
• Reinforced, heat-resistant polymer construction
• Integral riveted aluminum heat shield
• Front lip and side extensions, shields hand from hot gas block
• Relieved area at the top rear accommodates many overhanging optic mounts

The post Magpul MOE® M-LOK® Handguard appeared first on Tactical Cheetah.

These drop-in, polymer handguards for the AR15/M4 are fully mil-spec and perfect for that USGI look. They offer aluminum heat shields on both the upper and lower halves, providing heat protection for your hands. The Carbine Length handguard includes dual-layered, melonite coated head shields for increased protection.

Features:

• Make: AR-15/M4, M16
• Color: Black
• Length: 6.5” (Carbine), 8″ (Mid-Length), 12″ (Rifle)
• Material: Polymer
• Made in the USA

SPECS

• Shipping to FFL Dealer Required No
• Made in the USA
• Platform AR15
• Handguard Series
• Material Polymer
• Weight (oz) Rifle – 6.72 oz / Carbine – 6.72 oz / Mid-Length – 7.36 oz

The post Two-Piece Plastic Handguards appeared first on Tactical Cheetah.