The Rise Armament Rave 140 Trigger is the first of its kind as a truly premium trigger at mid-range prices. Fixed at a crisp 3.5-pound pull with fast trigger reset and minimal over-travel, this competition ready trigger allows you to shoot more accurately and much faster with much less effort.

Features:

• Includes anti-walk pins
• 3.5lb. single stage trigger
• Melonite coated internal parts
• Quik-Klik reset
• Flat trigger bow
• Fits most .308 and .223/5.56 AR style platforms
• Precision machined from high-grade, heat-treated tool steel and aluminum
• Black 8625 hard coat anodized housing
• Quality-assured with high-tech inspection equipment
• Lightened hammer
• Drop safety feature
• Weight: 2.4 oz.
• Made in the USA

The post Rise Armament RAVE-140 Trigger – Flat Bow w/ Anti-Walk Pins appeared first on Tactical Cheetah.

The AR15 Enhanced Carbine Buffer Kit with your choice of Heavy Buffer is the perfect option when you’re aiming to dial in the operation of your rifle build. This kit highlights our Enhanced Carbine Buffer Tube which delivers features that increase the reliability, security, and simplicity of your build.

Heavy buffers are traditionally selected when you are trying to slow down the movement of the BCG under recoil. Common situations to use a heavy buffer include over-gassed barrels, or when you are assembling an AR pistol or short-barreled configuration.

• Carbine Buffer – ~3oz
• H Buffer – ~3.8oz
• H2 Buffer – ~4.7oz
• H3 Buffer – ~5.6oz

AR15/AR10 Enhanced Carbine Buffer Tube Features:

• Carrier Support Extensions – Fully supports and guides the bolt carrier group into the buffer tube after a round is fired, preventing carrier tilt and unnecessary wear on key components. The Carrier Support Extensions also extend on either side of the buffer retaining pin, securing the pin in place while simultaneously preventing the buffer tube from backing out under recoil.
• Position Guide Drain Holes – Each position guide features a drainage hole that removes water from the system in marine environments. During routine operation, smoother cycling is achieved by allowing additional air to escape during the compression cycle of the rifle.
• Ramped Tube Design – Allows for effortless installation of traditional carbine stocks. We have removed the need for messing around with screwdrivers to get your furniture over the end of the buffer tube. Simply hold down the adjustment piece and push your stock onto the Enhanced Buffer Tube.
• Proper Thread Depth – Traditional buffer tubes feature extended unused threads that can cause your stock to become trapped when fully collapsed. While some turn these threads down, we’ve correctly machined the threads to the proper depth, providing a much cleaner look.
• Mil-spec Dimensions – Machined from a 7075-T6 Aluminum Impact Extrusion to mil-spec dimensions. All standard carbine stock options made to work with mil-spec buffer tube dimensions are compatible with our Enhanced Carbine Buffer Tube.

Includes:

• Enhanced Carbine Buffer Tube, 6-position
• Your choice of Heavy Buffer (H/H2/H3)
• Carbine Buffer Spring
• Endplate and lock nut
• Made in the USA

*Enhanced Carbine Buffer Tube is compatible with mil-spec stock options.

SPECS

• Shipping to FFL Dealer Required No
• Made in the USA
• Platform AR15
• Weight (oz)  H Buffer Kit: 11 oz
  H2 Buffer Kit: 11.45 oz
  H3 Buffer Kit: 12.4 oz
• Buffer Length: 3.25″

The post AR15 Enhanced Carbine Buffer Kit w/ Heavy Buffer appeared first on Tactical Cheetah.

This AR15 Barrel Nut fits standard AR15 Upper Receivers.

• Made in the USA
• Platform AR15
• Weight (oz) 1.2 oz
• Mil-spec phosphate coating

The post AR15 Barrel Nut appeared first on Tactical Cheetah.

Spare M4E1 Barrel Nut Wrench for use with the Aero Precision M4E1 Upper Receiver Barrel Nut.

• Made in the USA
• Platform AR15
• Weight (oz) 1.28 oz
• Works with a 1/2 inch drive torque wrench.

The post M4E1 Barrel Nut Wrench appeared first on Tactical Cheetah.

Spare screws for our M4E1/AR15 Enhanced Series Upper Receiver and Handguard.

Note: This product is already included with our AR15 Handguards. It is not necessary to be purchased separately. This individual product is available for customers who have lost or damaged their existing handguard screws.

Includes

• 8 – T15 Screws

UPDATE: As of 06/22/2017 we switched from T20 screws to new T15 screws.

• Made in the USA
• Platform AR15
• Screw Length: 8-32 x 3/8

The post AR15 Handguard Screw Pack – T15 (8 Screws) appeared first on Tactical Cheetah.

The ATLAS R-ONE is the newest addition to the Aero Precision Handguard lineup. Machined from 6061-T6 Aluminum, the R-ONE line of handguards are designed with size and weight in mind, providing the perfect handguard for your lightweight build. Our proprietary ATLAS attachment system is a durable and dependable mounting platform, maintaining a slim profile while still providing the strength and stability customers have grown to love from Aero Precision handguards.

Available in M-LOK® profiles with 4.8″, 7.3″, 9.3″, 10.3″, 12.7″ and 15″ options.

ATLAS

The new Aero Taper Lock Attachment System (ATLAS) is both functional and aesthetically pleasing. It features 2 mirrored tapered locking nuts that provide evenly distributed clamping pressure across a custom engineered barrel nut with use of a turnbuckle screw. A ratcheting detent further secures the design while providing positive registration during installation. By design, the even pressure of the ATLAS system avoids distortion of the handguard often seen with current applications during installation.

All hardware mounting parts are included with the purchase of an ATLAS Handguard.

Lightweight By Design

• M-LOK Handguard Weights: 4.8″ – 3.9 oz / 7.3″ – 5.22 oz / 9.3″ – 6.03 oz / 10.3″ – 6.7 oz / 12.7″ – 8 oz / 15″ – 9.07 oz
• Mounting Hardware Weight: 1.9 oz (same across all ATLAS Handguard options)

Features:

• Full top picatinny rail for optional attachments
• Quick disconnect sling socket at the 3, 6 and 9 o’clock positions
• Compatible with low profile gas blocks
• 1.3″ Inside diameter
• 1.5″ Outside diameter
• Compatible with mil-spec AR15 upper receivers and barrels
• NOT Compatible with M4E1 Enhanced Upper Receivers

ATLAS Handguards are designed to match seamlessly with our M4E1 Threaded Upper Receivers. Additionally, they are compatible with any Mil-Spec AR-15 upper receivers as well. However, they may not be compatible with billet upper receivers due to indexing tabs.

Please note: The ATLAS Handguards are NOT compatible with our M4E1 Enhanced Upper Receiver.

SPECS

• Shipping to FFL Dealer Required No
• Made in the USA
• Handguard Series ATLAS
• Attachment Type M-LOK
• Material Machined from 6061-T6 aluminum 4.8″, 7.3″, 9.3″, 10.3″, 12.7″, 15″
• Actual Handguard Lengths: Aero Precision rail lengths measure from end to end. This is the point of contact at the receiver to the end of the last picatinny slot at the muzzle.
• Weight (oz) 4.8″ – 3.9 oz / 7.3″ – 5.22 oz / 9.3″ – 6.03 oz / 10.3″ – 6.7 oz / 12.7″ – 8 oz / 15″ – 9.07 oz
• Other: Mounting Hardware Weight: 1.9 oz

The post AR15 ATLAS R-ONE M-LOK Handguard appeared first on Tactical Cheetah.

The ATLAS S-ONE is the newest addition to the Aero Precision Handguard lineup. Machined from 6061-T6 Aluminum, the S-ONE line of handguards are designed with size and weight in mind, providing the perfect handguard for your lightweight build. Our proprietary ATLAS attachment system is a durable and dependable mounting platform, maintaining a slim profile while still providing the strength and stability customers have grown to love from Aero Precision handguards.

Available in M-LOK® profiles with 7.3″, 9.3″, 10.3″, 12.7″ and 14.94″ options.

ATLAS

The new Aero Taper Lock Attachment System (ATLAS) is both functional and aesthetically pleasing. It features 2 mirrored tapered locking nuts that provide evenly distributed clamping pressure across a custom engineered barrel nut with use of a turnbuckle screw. A ratcheting detent further secures the design while providing positive registration during installation. By design, the even pressure of the ATLAS system avoids distortion of the handguard often seen with current applications during installation.

All hardware mounting parts are included with the purchase of an ATLAS Handguard.

Lightweight By Design

• M-LOK Handguard Weights: 7.3″ – 4.86 oz / 9.3″ – 5.47 oz / 10.3″ – 6.0 oz / 12.7″ – 7.00 oz / 15″ – 7.95 oz
• Mounting Hardware Weight: 1.9 oz (same across all S-ONE Handguard options)

Features:

• Front and rear picatinny rail
• Eliminated center of top rail for weight reduction
• Indexing grooves in 12:00 position for positive grip control
• Quick disconnect sling socket at the 3, 6 and 9 o’clock positions
• Compatible with low profile gas blocks
• 1.3″ Inside diameter
• 1.5″ Outside diameter
• Compatible with mil-spec AR15 upper receivers and barrels
• NOT Compatible with M4E1 Enhanced Upper Receivers

ATLAS Handguards are designed to match seamlessly with our M4E1 Threaded Upper Receivers. Additionally, they are compatible with any Mil-Spec AR-15 upper receivers as well. However, they may not be compatible with billet upper receivers due to indexing tabs.

Please note: The ATLAS Handguards are NOT compatible with our M4E1 Enhanced Upper Receiver.

SPECS

• Shipping to FFL Dealer Required No
• Made in the USA
• Handguard Series ATLAS
• Attachment Type M-LOK
• Material Machined from 6061-T6 aluminum
• Actual Handguard Lengths: Aero Precision rail lengths measure from end to end. This is the point of contact at the receiver to the end of the last picatinny slot at the muzzle.
• Weight (oz) 7.3″ – 4.86 oz / 9.3″ – 5.47 oz / 10.3″ – 6.0 oz / 12.7″ – 7.00 oz / 15″ – 7.95 oz
• Other: Mounting Hardware Weight: 1.9 oz

The post AR15 ATLAS S-ONE M-LOK Handguard appeared first on Tactical Cheetah.

Our Enhanced Quad Rail (EQ) Handguards provide a lightweight free float design for your custom AR15 build. The EQ system features x4 1913 picatinny rails for advanced modularity and customization. Machined to mil- spec dimensions and engineered to perfection, these handguards eliminate bulk while retaining strength and stability.

Features:

• 1pc free float design
• Built in anti-rotation tabs
• Scalloped rails
• Continuous top rail
• 1.72″ inside diameter (from barrel nut cut to forward end) fits most muzzle devices and 1.5″ suppressors
• 1.78″ inside barrel nut cut area diameter
• Compatible with low profile gas blocks
• Gen 2 Feature – Eliminated half of the 3, 6 and 9 o’clock picatinny rails, saving weight and providing a more ergonomic design in the rear gripping area
• Gen 2 Feature – Quick disconnect sling socket at the 3, 6 and 9 o’clock positions
• Gen 2 Feature – Additional milling along flats to aid with gripping and add visual appeal
• Gen 2 Feature – New profile for the continuous picatinny top rail

Are you attaching this handguard to a standard threaded upper receiver?
Make sure to select “Yes” under the Bar Barrel Nut option above (shims included). Our handguards use the BAR interface and do not work with a standard barrel nut. If you are using our M4E1 Enhanced Upper Receiver, no additional pieces are needed. Purchased with a handguard, the BAR Barrel Nut is $20 ($40 when sold separately).

*Please note – This handguard is specific to the AR15/M4E1 platform. It is not compatible with the M5 .308/M5E1 platform.

SPECS

• Shipping to FFL Dealer Required No
• Made in the USA
• Handguard Series M4E1
• Attachment Type Quad Rail
• Material Machined from 6061-T6 aluminum 7″ – 7.25″, 9″ – 9.22″, 12″ – 12.63″, 15″ – 14.94″
• Actual Handguard Lengths: Aero Precision rail lengths measure from end to end. This is the point of contact at the receiver to the end of the last picatinny slot at the muzzle.
• Weight (oz) 7″ – 7.2oz, 9″ – 8.8oz, 12″ – 12oz, 15″ – 13.6oz
• Other: Handguard Screw Torque – 25 in-lbs

The post AR15 Enhanced Quad Rail Handguards, Gen 2 appeared first on Tactical Cheetah.

The Magpul MOE M-LOK Hand Guard (Magpul Original Equipment) for AR15/M4 firearms with carbine-length gas systems combines the light weight of a standard hand guard with modular flexibility.

Designed with versatility in mind, M-LOK slots at the two, six, and ten o’clock positions allow the attachment of optional 1913 Picatinny rail sections and other M-LOK accessories for the direct mounting of tactical lights, slings, grips, etc. Reinforced, heat-resistant polymer construction provides operational durability without the weight and expense of an aluminum rail hand guard. Front extensions and lower lip provides additional operator protection from hot front sight assembly.

Features:

• Replaces standard M4 Carbine, Mid-Length or Rifle-type plastic hand guards
• Compatible with most piston-driven as well as ‘direct impingement’ gas systems
• Easy to install utilizing existing delta ring and round or triangular front hand guard retaining cap
• M-LOK slots at the two, six, and ten o’clock positions for mounting MIL-STD-1913 Picatinny rails or other direct-attach M-LOK accessories
• Reinforced, heat-resistant polymer construction
• Integral riveted aluminum heat shield
• Front lip and side extensions, shields hand from hot gas block
• Relieved area at the top rear accommodates many overhanging optic mounts

The post Magpul MOE® M-LOK® Handguard appeared first on Tactical Cheetah.

This AR15 Complete Upper Receiver, paired with the ATLAS R-ONE handguard streamlines the appearance of your next AR15 build by removing the Forward Assist. By combining our lightest handguards and barrel profiles with the No Forward Assist Upper Receiver you can maximize the weight savings for your next build.

Includes:

• AR15 Assembled Upper Receiver with No Forward Assist
• 7″ M-LOK ATLAS R-ONE Handguard
• 7.5″ 5.56 Pistol Length CMV Barrel
• Low Profile Gas Block and Pistol Length Gas Tube
• Product comes assembled
• This complete upper does not include BCG or Charging Handle. These products may be selected as add-ons under the FINISH YOUR BUILD tab
• The muzzle brake that comes with this complete upper receiver is NOT pinned nor welded to this barrel.

AR15 Upper Receiver with No Forward Assist Features:

• M4 Feedramps
• .250 takedown pin holes
• Laser engraved T-marks
• No forward assist provisions
• Port door installed

ATLAS R-ONE Handguard Features:

• Full top picatinny rail for optional attachments
• Quick disconnect sling socket at the 3, 6 and 9 o’clock positions
• Compatible with low profile gas blocks
• 1.3″ Inside diameter
• 1.5″ Outside diameter
• Compatible with mil-spec AR15 upper receivers and barrels

7.5″ 5.56 Pistol Length Barrel Features:

• Chamber: 5.56
• Length: 7.5″
• Twist: 1 in 7
• Threading: 1/2″x28
• Material: Chrome Moly Vanadium
• Finish: QPQ corrosion resistant finish both inside and out
• Gas Block: .750
• Gas System Length: Pistol
• Weight: 17.25 oz
• M4 Barrel Extension
• HP and MPI Tested

SPECS

• Shipping to FFL Dealer Required No
• Made in the USA
• Platform AR15
• Complete Upper Series ATLAS
• Caliber 5.56 NATO
• Barrel Length 7.5
• Finish Anodized

The post AR15 Complete Upper w/ No Forward Assist, 7.5″ 5.56 Barrel, 7″ M-LOK ATLAS R-ONE Handguard – Anodized Black appeared first on Tactical Cheetah.